Minecraft Wiki

除另有声明,转载时均必须注明出处若簡繁轉換出錯,請以遊戲內為準请勇于扩充与修正内容有兴趣逛逛我们的微博沟通交流,欢迎到社区专页需要协助,请在告示板留言

了解更多

Minecraft Wiki
Advertisement
Ic translate
此条目的(部分)内容需要翻译。

你可以帮助我们来翻译此条目,但请勿使用机器翻译

方形的形状,比如正方形和长方形,在Minecraft中相对容易制作,因为世界是由方块组成的。而其它的形状,比如三角形和圆形,则相对的难以制作。虽然在Minecraft的方块世界中永远不可能有一个完美的圆或完美的三角形,但本教程将向您展示建造最接近圆或三角形的形状的方法。

那么在制作本教程中的形状时可以使用任何方块,只要形状包含高度作为其尺寸之一,除了沙砾混凝土粉末

基础知识和用途

如果你是搞建筑的,了解如何做三角形和圆会很有帮助。虽然知道如何构建这些形状对于生存没有任何帮助,但当你制作雕像、像素艺术、房子或大型喷泉时,添加三角形和圆形会让你的建筑更有深度。

Clown face made of circles

这是一个小丑的脸,它只有圆形,以及半圆的框架。一旦你知道如何在Minecraft中构建三角形和圆形,你就可以制作很多东西,这是其中之一。

一旦你知道如何构建特定的形状,你就可以进行无限的创造,并给其他玩家留下深刻的印象。一些设计想法包括一个只由三角形组成的雕像,一个从外面看起来像一个巨大球体的大厦,或者一个巨大的椭圆形手臂。当你不局限于构建正方形和长方形时,你有能力构建许多事物——尽情地展现你的创造力!

所有的形状分为两大类:二维和三维。二维形状只有长度和宽度。三维形状还包括高度。三维形状通常是两个不同的二维形状的组合,或者是两个相同类型但旋转方式不同的二维形状。要制作特定形状,请往下阅读。

二维形状

这些二维形状只有长度和高度,或者只有长度和宽度。大多数三维形状都是基于一个或多个二维形状。

注意:这些图形的每个只显示图形的边框时什么样的。如果你愿意,你可以把形状的中间填满。并且,要记住,对于网格,形状看起来会比实际更宽。

直角三角形

直角三角形可能是最简单的三角形,因为它们的两条边都是直线,要么垂直要么水平。只有一条边是对角线。下面的网格展示了如何制作一个有4个方块长度的底和高的直角三角形,以及一个有9个方块长度的底和高的直角三角形。



直角三角形的扩展

你可以画出底边和高度不一致的直角三角形,但是它们很难画,因为对角线上没有一条直线。前面显示的直角三角形是45度的对角线。

对于65 - 70度角的对角线,在到直角边之前,反复向上放置2个方块,如下图所示:


对角线角度为20 - 25度的对角线,在到直角边前,重复水平放置对角线2块,如下图所示:


对于介于25度和45度之间的角,以及介于45度和65度之间的角,必须使用上面的两个斜率的组合。

Equilateral triangle and right triangle

这是Minecraft中等边三角形和直角三角形的对比图。它们的底和高都是9块。

等边三角形

等边三角形比直角三角形更抽象,但它们仍然有一个明确的方法来构建等边三角形。首先,用方块构建出一条直线,作为三角形的底边。然后,在直线的每个边缘放置一个方块。向上搭,每两个方块就往里面退一格,如图所示:




注意,所造三角形越大,看起来就越想现实中的三角形。

圆形

玩家在Minecraft中很难制作圆形,部分原因是:不同于三角形,这个由方块组成的游戏中没有一种方法可以制作任何尺寸的圆;每个尺寸使用完全不同的方块排列。当您查看不同大小的圆圈时,您会发现并非所有圆圈都具有相同的形状,并且它们都不是完美的圆形。这是因为不同大小的圆形必须具有不同的块排列,以便它们看起来尽可能接近圆形。

不能解释每个圆的块的模式,因为,如前所述,每个尺寸具有完全不同的图案。制作圆形的最佳方法是尝试不同的方块排列,或者借鉴由其他人的排列并制作自己的圆形图像。

看看下面的图片。这是制作直径为1-18的所有圆形的一种方法示例。请注意,所造圆形越大,它们看起来就越圆。

Pixel circles





3 Dimensional Shapes

3 dimensional shapes are composed of length, width, and height, and are usually made up of either 1 or several 2-dimensional shapes. 3-dimensional shapes are often much more complex than 2-dimensional.

Equilateral Triangular Prism

Partial triangular prism

A triangular prism when steps 1 and 2 have been completed.

A triangular prism consists of 2 triangles and 3 rectangles connecting them. In an equilateral triangular prism, the triangles in it are equilateral. Triangular prisms are one of the more simple 3-dimensional shapes. Before starting, it's important to know what each dimension represents:

  • Height = The distance between the bottom and top of each triangle.
  • Width = The length of the base of each triangle. In an equilateral triangular prism, it should be the same as the height.
  • Length = The length of each rectangle, or the distance between both triangles.

These steps show how to make a triangular prism:

  1. Create an equilateral triangle, whichever size you like, and fill the middle of it. Look at the sub-section "Equilateral triangle" in the section "2-dimensional shapes" to see how to make this.
  2. Find out what length you want your rectangles to be. Then, count that many blocks from the triangle you just made, and make another equilateral triangle there, just like you made the first one. It should be exactly across from that one.
  3. Connect both triangles on all 3 sides. If you made your triangular prism in the air and visible from all sides, you will be able to see the 3 rectangles and 2 triangles. You are done.
Equilateral triangular prism

This is an example of a completed equilateral triangular prism with a height and width of 7, and a length of 9.

Right Triangular Prism

A right triangle prism consists of 2 triangles and 3 rectangles. It is like an equilateral triangular prism, but made with right triangles instead of equilateral triangles. You could also think of it as a rectangular prism cut in half diagonally.

The dimensions for the diagonally halved rectangular prism represent the same things as for the triangular prism, so look at the height, width, and length for the triangular prism as a guide. Then, follow these steps:

  1. Create a right triangle, whichever size you like, and fill in the middle of it. Look at the sub-section "Right triangle" in the section "2-dimensional shapes" to see how to make this.
  2. Find out what length you want your rectangles to be. Then, count that many blocks from the triangle you just made, and make another right triangle there, just like you made the first one. It should be exactly across from that one.
  3. Connect both triangles on all 3 sides. If you made your diagonally halved rectangular prism in the air and visible from all sides, you will be able to see the 3 rectangles and 2 right triangles. You are done.
Right triangular prism

A fully completed right triangular prism, with a height and width of 5 blocks, and a length of 7.

Just like for the 2-dimensional right triangle, you can make the height and width of a right triangular prism bigger or smaller if you want. Make the diagonal slope of each right triangle at what ever degree of an angle you want, and just connect the triangles that same way you would for a regular right triangular prism.

Cylinder

Cylinders, like triangular prisms, are not too difficult to make, considering that they are made up of different 2 dimensional shapes. Cylinders could be thought of as vertical circular prisms.

  1. Make a circle on the ground, with whatever diameter you want. Fill the middle of it in.
  2. Place blocks higher to extend the circle upwards, however high you want. For these ones, you can fill the middle in if you want, but if you do, there will be no space inside of the cylinder.
  3. Place a final filled-in circle on top to close the cylinder. You're finished now.

Sphere

Outline of a sphere

Here is the outline of the 3 connecting circles in a sphere, after steps 3 of 4 have been completed.

A sphere is rather difficult to make in Minecraft, but it looks great when it's finished. It is basically 3 circles, each rotated a different way, with blocks connecting them. Here are the steps:

  1. Design what size you want your sphere, create a circle with height and width for its dimensions.
  2. Make another circle with height and length for its dimensions. It's center top and center bottom block should share the center top and bottom block of the first circle you made.
  3. Make your last circle with length and width for its dimensions. The center block on the right side, left side, close side, and far side should be shared with one of the 2 other circles. You should now have the basic outline for your sphere.
  4. Finally, fill in everything in between to finish of the sphere. The exact blocks you fill in depends on the size of your sphere, but try to estimate what looks best for a sphere.
15 x 15 full sphere

A fully completed sphere with a diameter of 15.

Dome or Partial Sphere

A dome is basically one half of a sphere. Usually, it's the top half, but for variations of half spheres that are not domes, it can be the right, left, or bottom half. Domes can be used to make fancy roofs, or to make "bubbles" in a wall. You can optionally use 1/4 of a sphere, or 2/3 of a sphere, for different looks, depending on what scenario you're using the partial sphere for. See this picture for an example of a half sphere, or dome:

Small half sphere

For more information on domes and similar variants, see Tutorials/Curved roofs.

"Oval" Tube

This shape does not have an official name, but it looks very cool to make. It's slightly difficult, as it requires several types of circles in different directions, but it's not too hard. It looks similar to a cylinder, but it has curved tops and bottoms. See the following steps:

  1. Make the bottom half of a sphere on the ground, so that the open side is facing towards the top.
  2. On the highest part of the partial sphere, extend those blocks up however high you want.
  3. Create the top half of a sphere on top of the highest circle of blocks, so that the shape is closed in.
  4. If desired, you can fill in the middle of the tube, so that there is no room on the inside.

See the following layered blueprint for an example of an oval tube with a diameter of 7 and a height of 11.

Rhombicuboctahedron

Rhombicuboctahedron is an Archimedean solid with squares and triangles. There are 24 identical vertices, with one triangle and three squares meeting at each.

Trivia

  • If you have the software Microsoft paint, you will have an easier job with making shapes in Minecraft. Select a shape from the tool bar and make it on the thinnest setting. Then, draw it so that the horizontal and vertical pixels are equal, and zoom in all the way. You should be able to tell how the mini-squares paint is composed of are arranged.

See also

  • Tutorials/Construction
  • Tutorials/Curved roofs
  • Tutorials/Pixel art
Advertisement