Minecraft Wiki

除另有声明,转载时均必须注明出处若簡繁轉換出錯,請以遊戲內為準请勇于扩充与修正内容有兴趣逛逛我们的微博沟通交流,欢迎到社区专页需要协助,请在告示板留言

了解更多

Minecraft Wiki
Advertisement
Ic translate
此條目的(部分)內容需要翻譯。

你可以幫助我們來翻譯此條目,但請勿使用機器翻譯

仙人掌農場仙人掌有效的種植和收穫途徑。仙人掌農場對於熔煉仙人掌以得到仙人掌綠染料非常有用。創造性的使用水源和沙會使得仙人掌農場有趣且高效。仙人掌的生長要求在沙上,且周圍沒有被其他方塊填充。

設計

行列式種植

如果仙人掌之上有幾格的空間,而且在仙人掌長高之後的位置旁邊有一個實體方塊,那麼長高的這部分仙人掌就會立即掉落在它的底部。可以利用水流將這些掉落的仙人掌運到一個收集點去。技巧是將「破壞者」方塊沿著仙人掌放置成一行,這樣它可以迫使仙人掌掉落到水中去。高效仙人掌農場可由行列式種植加水流運輸構成,如下所示。

如果你在寒冷的生態域,可以放置火把來放置被雪覆蓋。留心掉落的仙人掌塊被仙人掌破壞掉。

鷹架式農場

這種仙人掌農場,你無需用到一個平台和水流,收穫的仙人掌也可以免於被破壞掉。 首先,找一個12×12的區域並在中間放置7格沙[1]。 其次,在這條沙線四周用鵝卵石或者其他你喜歡的材質圍個圈[2]。再次,再沿著沙線放置第二層鵝卵石這樣你可以輕易的夠到長高后的仙人掌並收穫它們[3]。最後,在鵝卵石和沙之間的區域倒上水[4]

等到仙人掌長高之後,你可以站在鵝卵石達成的鷹架上收割掉上面的部分。用這種辦法,你可以收穫大約85%的仙人掌方塊,而不會被破壞掉。

活塞底部收割農場

活塞可以放置在仙人掌的底部,當它們被啟動的時候,會推掉臨近的仙人掌底部,這樣會收割掉這上面所有的仙人掌方塊。

Piston pushing an adjacent block

這個設計非常簡單,放置一個面朝上的活塞,然後放置一個礫石在上面。當仙人掌長高了之後,啟動活塞將會推出礫石,這將破壞掉四周的仙人掌。這將會是非常高效的,因為100%的仙人掌都會被手機而沒有被破壞掉,儘管這需要你重新種植他們會有點麻煩。這個設計也是非常簡單來拓展的。

你收穫之後,收回活塞礫石將會落下。因此這種辦法不需要任何粘性活塞。

Piston pushing middle block

Another method is to setup pistons to push the middle cactus block, breaking the top two blocks. This allows the third, bottom block to remain that replanting is not necessary. Note that cacti will not render as many blocks and is potentially less efficient due to losing blocks in the process, similar to stepping on tilled dirt with seeds growing and losing the seedlings.

Automatic Harvesting

File:2011-10-29 20.53.11.png

Example of the automatic cactus farm

The concept behind this is done with the setup outlined above, except when constructing your building you need to place blocks two spaces above the sand, adjacent to (but not touching the sand) so that they float in the air. The reason behind this is that when cactus comes in contact with an adjacent block it will auto-shed the segment of cactus touching it. This way, when the cactus grows to its 3rd segment high, your floating block will be adjacent to the cactus, so the top piece will break and fall into the water.

Some notes about this though:

  • When a collectable block touches a cactus it will be destroyed. So sometimes when it auto-sheds itself the collectable cactus block will fall onto living cactus and destroy itself.
  • It may be more beneficial to place the block high enough so that when the 2nd segment attempts to grow it harvests itself. This reduces the waiting period of growth in the initial planting.
  • You want to minimize the number of possible points of contact for a cactus block to make contact and fall back to the living cactus. Using the dense checkerboard pattern, consider using iron bars or glass panes and placing them with the bars/panes separated by 3 spaces on the cardinal direction and 1 space on the ordinal direction. This ceiling pattern ensures that all cactus are only being touched on one side, and minimally so (2 pixels), giving the block plenty of room to escape.
  • It is also possible to make a transport system for the cactus if you place a single water source in the corner of the 'box' you constructed for the farm. When placing the water block, you need to place it on the 2nd block above the ground to create a 'down fall' of water which then produces the required force to allow the water to reach the farthest corner away from the source block. With this setup it is possible to have the newly harvested cactus blocks float to a single collection point.
  • Try to experiment with wooden pressure plates at the collection point. Set up a redstone torch which stops burning when the pressure plate is pressed down by a cactus block.
  • The block adjacent to the top cactus can be a sign rather than a solid block.

Multilevel Farming

Automatic farms can be stacked on top of each other to increase yield.

Using a design like this, you can create insanely large and space efficient cactus farms. Also, with some water, hoppers, and a chest, you can make it fully autonomous leaving it, and collecting the cactus later.

影片

Tutorials/Cactus Farming/video

Advertisement