你可以帮助我们来翻译此条目,但请勿使用机器翻译。
仙人掌农场是仙人掌有效的种植和收获途径。仙人掌农场对于烧炼仙人掌以得到仙人掌绿染料非常有用。创造性的使用水源和沙子会使得仙人掌农场有趣且高效。仙人掌的生长要求在沙子上,且周围没有被其他方块填充。
设计
行列式种植
如果仙人掌之上有几格的空间,而且在仙人掌长高之后的位置旁边有一个实体方块,那么长高的这部分仙人掌就会立即掉落在它的底部。可以利用水流将这些掉落的仙人掌运到一个收集点去。技巧是将“破坏者”方块沿着仙人掌放置成一行,这样它可以迫使仙人掌掉落到水中去。高效仙人掌农场可由行列式种植加水流运输构成,如下所示。
- Cactusfarm1.jpg
放置一排7格沙子,间隔布置中间留下同样长的沟。
- Cactusfarm2.jpg
在每一行的第二个沙子上,再放置一格沙子,然后再在上面放置两个不受重力影响的方块(圆石就可以)。
- Cactusfarm3.jpg
移除圆石下的两格沙子。在石柱旁边种植仙人掌。当仙人掌生长到石柱上端的时候,它会折断掉落到沟中,你可以在其中放水。
- Cactusfarm4.jpg
完成!
如果你在寒冷的生物群系,可以放置火把来放置被雪覆盖。留心掉落的仙人掌块被仙人掌破坏掉。
Pedestal Cactus Farming
With this method of cactus farming, you can harvest cacti without taking damage by using a platform and a water canal for the cactus blocks. First, look for a 12x12 square and begin with a line of 7 sand blocks.[1] After that, build a footing with Cobblestone or any other block you like and surround the sand line.[2] Then, build another layer with Cobblestone so you can reach the second level of a grown cactus so you can hit them easily.[3] Lastly, get a bucket with water and pour out the water in the middle of the sluice.[4] Wait for the cactus to grow up and break the upper block while standing on the pedestal. With this method of farming you gain about 85% of the cactus blocks.
- 2011-10-23 20.51.22.png
Cactus pedestal farming in-game
Piston pushing base block
Pistons can be set in a place where when they activate, the pushing end is adjacent to the base block of the cacti, causing it and the above blocks to break.
| Piston based cactus farm视频(在 YouTube 上观看) |
|---|
Piston pushing an adjacent block
This is a very simple design, with pistons below the gravel blocks. When the cactus has fully grown, activating the pistons will then push the gravel blocks up, which will break all the adjacent cacti blocks. This is very effective when it comes to harvesting it as cacti yield is 100% with no loss, though it requires you to replant them. This design is also very easily expandable.
And when you are done harvesting, contracting the piston blocks will also allow the gravel to fall. Hence this design does not require any sticky pistons.
- Gravelcactifarm.png
Basic design setup
- Gravelcactifarm2.png
The results of extending the pistons below the gravel blocks
Piston pushing middle block
Another method is to setup pistons to push the middle cactus block, breaking the top two blocks. This allows the third, bottom block to remain that replanting is not necessary. Note that cacti will not render as many blocks and is potentially less efficient due to losing blocks in the process, similar to stepping on tilled dirt with seeds growing and losing the seedlings.
- Simplecactifarm.jpg
A semi automatic cactus farm
- Simplecactifarm2.jpg
The semi automatic cactus farm activated
Automatic Harvesting
Example of the automatic cactus farm
The concept behind this is done with the setup outlined above, except when constructing your building you need to place blocks two spaces above the sand, adjacent to (but not touching the sand) so that they float in the air. The reason behind this is that when cactus comes in contact with an adjacent block it will auto-shed the segment of cactus touching it. This way, when the cactus grows to its 3rd segment high, your floating block will be adjacent to the cactus, so the top piece will break and fall into the water.
Some notes about this though:
- When a collectable block touches a cactus it will be destroyed. So sometimes when it auto-sheds itself the collectable cactus block will fall onto living cactus and destroy itself.
- It may be more beneficial to place the block high enough so that when the 2nd segment attempts to grow it harvests itself. This reduces the waiting period of growth in the initial planting.
- You want to minimize the number of possible points of contact for a cactus block to make contact and fall back to the living cactus. Using the dense checkerboard pattern, consider using iron bars or glass panes and placing them with the bars/panes separated by 3 spaces on the cardinal direction and 1 space on the ordinal direction. This ceiling pattern ensures that all cactus are only being touched on one side, and minimally so (2 pixels), giving the block plenty of room to escape.
- It is also possible to make a transport system for the cactus if you place a single water source in the corner of the 'box' you constructed for the farm. When placing the water block, you need to place it on the 2nd block above the ground to create a 'down fall' of water which then produces the required force to allow the water to reach the farthest corner away from the source block. With this setup it is possible to have the newly harvested cactus blocks float to a single collection point.
- Try to experiment with wooden pressure plates at the collection point. Set up a redstone torch which stops burning when the pressure plate is pressed down by a cactus block.
- The block adjacent to the top cactus can be a sign rather than a solid block.
| Automatic cactus farm视频(在 YouTube 上观看) |
|---|
Multilevel Farming
Automatic farms can be stacked on top of each other to increase yield.
- MultifarmWater.png
4-level automatic cactus farm with water transport. This one yields only slightly more than the above at the collection point, because not all cactus blocks hit water.
Using a design like this, you can create insanely large and space efficient cactus farms. Also, with some water, hoppers, and a chest, you can make it fully autonomous leaving it, and collecting the cactus later.
| Perhaps the largest cactus farm视频(在 YouTube 上观看) |
|---|
视频
Tutorials/Cactus Farming/video
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||




