仙人掌种植 是一个系统的种植与收获仙人掌.仙人掌农场 中仙人掌是非常有用的绿色染料(在冶炼仙人掌后)。有趣的是,使用水和砂的创造性的结构,可以实现有效的和大规模的养殖 。 仙人掌生长实现沙块上,并与邻近的一个块情况下植物的旁边。
设计
分层仙人掌
If there is space available above a 1 or 2 block high cactus, but there is a block next to where the new cactus block will be, then the cactus will grow and immediately break off, dropping a cactus resource around its base. Water flows can then be used to move the drops from many planted cacti to a single collection point. The trick is to place the "breaker" block along the same row as the cactus, so that it forces the dropped cactus block into the water. Highly efficient cactus farms can be generated using tiered rows and waterfalls, as seen below.
- Cactusfarm1.jpg
Make rows of sand that are 7 blocks long, alternating with a trench that is equally as long.
- Cactusfarm2.jpg
On every second square of the sand rows, add a sand block and two non-falling blocks (cobblestone is fine) on top of the sand block.
- Cactusfarm3.jpg
Remove the sand block that is supporting the two non-falling blocks. Plant cacti on the sand adjacent to the column of blocks. When the cactus grows to a third column, it will snap off, bounce off of the blocks, and fall into the trench, which you can fill with water.
- Cactusfarm4.jpg
Done!
You may also put a Torch to prevent freezing in a snowy or freeze-prone biome. Keep in mind that some of the cactus drops can be destroyed by the cactus block.
| Simple automated cactus farm视频(在 YouTube 上观看) |
|---|
Pedestal Cactus Farming
底座的仙人掌种植 这种仙人掌的耕作方法,你可以收获仙人掌不受伤害的通过一个平台和一个仙人掌块水管。首先,找一个提供12X12平方和开始一个线7砂块。[ 1 ]之后,建立一个以鹅卵石或其他任何你喜欢的基础上,围绕块沙线。[ 2 ],然后,建立另一层鹅卵石,所以你可以你可以打他们到达一个生长的仙人掌第二个层次。[ 3 ]最后,把一桶水,把水倒出来的水闸中。[ 4 ]等待仙人掌成长和突破上块在底座上的立。这种耕作方法你获得关于仙人掌块85%。
- 2011-10-23 20.51.22.png
Cactus pedestal farming in-game
Piston pushing base block
Pistons can be set in a place where when they activate, the pushing end is adjacent to the base block of the cacti, causing it and the above blocks to break.
| Piston based cactus farm视频(在 YouTube 上观看) |
|---|
Piston pushing an adjacent block
This is a very simple design, with pistons below the gravel blocks. When the cactus has fully grown, activating the pistons will then push the gravel blocks up, which will break all the adjacent cacti blocks. This is very effective when it comes to harvesting it as cacti yield is 100% with no lost, though it requires you to replant them. This design is also very easily expandable.
And when you are done harvesting, contracting the piston blocks will also allow the gravel to fall. Hence this design does not require any sticky pistons.
- Gravelcactifarm.png
Basic design setup
- Gravelcactifarm2.png
The results of extending the pistons below the gravel blocks
Piston pushing middle block
Another method is to setup pistons to push the middle cactus block, breaking the top two blocks. This allows the third, bottom block to remain that replanting is not neccessary. Note that cacti will not render as many blocks and is potentially less efficient due to losing blocks in the process, similar to stepping on tilled dirt with seeds growing and losing the seedlings.
- Simplecactifarm.jpg
A semi automatic cactus farm
- Simplecactifarm2.jpg
The semi automatic cactus farm activated
Automatic Harvesting
Example of the automatic cactus farm
The concept behind this is done with the setup outlined above, except when constructing your building you need to place blocks two spaces above the sand, adjacent to (but not touching the sand) so that they float in the air. The reason behind this is that when cactus comes in contact with an adjacent block it will auto-shed the segment of cactus touching it. This way, when the cactus grows to its 3rd segment high, your floating block will be adjacent to the cactus, so the top piece will break and fall into the water.
Some notes about this though:
- When a collectable block touches a cactus it will be destroyed. So sometimes when it auto-sheds itself the collectable cactus block will fall onto living cactus and destroy itself.
- It may be more beneficial to place the block high enough so that when the 2nd segment attempts to grow it harvests itself. This reduces the waiting period of growth in the initial planting.
- It is also possible to make a transport system for the cactus if you place a single water source in the corner of the 'box' you constructed for the farm. When placing the water block, you need to place it on the 2nd block above the ground to create a 'down fall' of water which then produces the required force to allow the water to reach the farthest corner away from the source block. With this setup it is possible to have the newly harvested cactus blocks float to a single collection point.
- Try to experiment with wooden pressure plates at the collection point. Set up a redstone torch which stops burning when the pressure plate is pressed down by a cactus block.
- The block adjacent to the top cactus can be a sign rather than a solid block.
| Automatic cactus farm视频(在 YouTube 上观看) |
|---|
Multilevel Farming
Automatic farms can be stacked on top of each other to increase yield.
- MultifarmWater.png
4-level automatic cactus farm with water transport. This one yields only slightly more than the above at the collection point, because not all cactus blocks hit water.
Using a design like this, you can create insanely large and space efficient cactus farms.
| Perhaps the largest cactus farm视频(在 YouTube 上观看) |
|---|




