仙人掌种植 是一个系统的种植与收获仙人掌.仙人掌农场 中仙人掌是非常有用的绿色染料(在冶炼仙人掌后)。有趣的是,使用水和砂的创造性的结构,可以实现有效的和大规模的养殖 。 仙人掌生长实现沙块上,并与邻近的一个块情况下植物的旁边。
设计
分层仙人掌
如果有可用的以上1或2块高仙人掌空间,但有一块一块将被在新的仙人掌,仙人掌会立刻就断落,仙人掌资源在其基地。水可以用来移动滴从许多种仙人掌单个集合点。诀窍是发生在同一行的“断路器”块为仙人掌,从而迫使下降仙人掌块入水。高效的仙人掌农场可以使用分层的行和瀑布产生的,如下图所示。
- Cactusfarm1.jpg
使排砂,7块长,交替与沟槽是一样长。
- Cactusfarm2.jpg
在砂行每二平方,加砂块和两个非下降块(鹅卵石是好的)上的砂块。
- Cactusfarm3.jpg
拆下砂块是支持两个非下降块。植物仙人掌相邻块的砂柱。当仙人掌长到三分之一列,它会折断,反弹的块,并落入槽,可以装满水。
- Cactusfarm4.jpg
Done!
You may also put a Torch to prevent freezing in a snowy or freeze-prone biome. Keep in mind that some of the cactus drops can be destroyed by the cactus block.
| Simple automated cactus farm视频(在 YouTube 上观看) |
|---|
Pedestal Cactus Farming
With this method of cactus farming, you can harvest cacti without taking damage by using a platform and a water canal for the cactus blocks. First, look for a 12x12 square and begin with a line of 7 sand blocks.[1] After that, build a footing with Cobblestone or any other block you like and surround the sand line.[2] Then, build another layer with Cobblestone so you can reach the second level of a grown cactus so you can hit them easily.[3] Lastly, get a bucket with water and pour out the water in the middle of the sluice.[4] Wait for the cactus to grow up and break the upper block while standing on the pedestal. With this method of farming you gain about 85% of the cactus blocks.
- 2011-10-23 20.51.22.png
Cactus pedestal farming in-game
Piston pushing base block
Pistons can be set in a place where when they activate, the pushing end is adjacent to the base block of the cacti, causing it and the above blocks to break.
| Piston based cactus farm视频(在 YouTube 上观看) |
|---|
Piston pushing an adjacent block
This is a very simple design, with pistons below the gravel blocks. When the cactus has fully grown, activating the pistons will then push the gravel blocks up, which will break all the adjacent cacti blocks. This is very effective when it comes to harvesting it as cacti yield is 100% with no lost, though it requires you to replant them. This design is also very easily expandable.
And when you are done harvesting, contracting the piston blocks will also allow the gravel to fall. Hence this design does not require any sticky pistons.
- Gravelcactifarm.png
Basic design setup
- Gravelcactifarm2.png
The results of extending the pistons below the gravel blocks
Piston pushing middle block
Another method is to setup pistons to push the middle cactus block, breaking the top two blocks. This allows the third, bottom block to remain that replanting is not neccessary. Note that cacti will not render as many blocks and is potentially less efficient due to losing blocks in the process, similar to stepping on tilled dirt with seeds growing and losing the seedlings.
- Simplecactifarm.jpg
A semi automatic cactus farm
- Simplecactifarm2.jpg
The semi automatic cactus farm activated
Automatic Harvesting
Example of the automatic cactus farm
The concept behind this is done with the setup outlined above, except when constructing your building you need to place blocks two spaces above the sand, adjacent to (but not touching the sand) so that they float in the air. The reason behind this is that when cactus comes in contact with an adjacent block it will auto-shed the segment of cactus touching it. This way, when the cactus grows to its 3rd segment high, your floating block will be adjacent to the cactus, so the top piece will break and fall into the water.
Some notes about this though:
- When a collectable block touches a cactus it will be destroyed. So sometimes when it auto-sheds itself the collectable cactus block will fall onto living cactus and destroy itself.
- It may be more beneficial to place the block high enough so that when the 2nd segment attempts to grow it harvests itself. This reduces the waiting period of growth in the initial planting.
- It is also possible to make a transport system for the cactus if you place a single water source in the corner of the 'box' you constructed for the farm. When placing the water block, you need to place it on the 2nd block above the ground to create a 'down fall' of water which then produces the required force to allow the water to reach the farthest corner away from the source block. With this setup it is possible to have the newly harvested cactus blocks float to a single collection point.
- Try to experiment with wooden pressure plates at the collection point. Set up a redstone torch which stops burning when the pressure plate is pressed down by a cactus block.
- The block adjacent to the top cactus can be a sign rather than a solid block.
| Automatic cactus farm视频(在 YouTube 上观看) |
|---|
Multilevel Farming
Automatic farms can be stacked on top of each other to increase yield.
- MultifarmWater.png
4-level automatic cactus farm with water transport. This one yields only slightly more than the above at the collection point, because not all cactus blocks hit water.
Using a design like this, you can create insanely large and space efficient cactus farms.
| Perhaps the largest cactus farm视频(在 YouTube 上观看) |
|---|
Video
Tutorials/Cactus Farming/video
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||




