Minecraft Wiki
Advertisement

This tutorial listed many common roof types, roughly in ascending order of complexity, and gives examples of each one.

Wikipedia provides additional information, at this and related URLs: http://en.wikipedia.org/wiki/List_of_roof_shapes

Flat roof

Flat roof

Blacksmith's building from the NPC village.

This roof type may also be referred to as a parapet roof, meaning a roof with a parapet (a low protective wall) around it.

Making a flat roof is trivial, but making a flat roof that looks real takes a little more effort. Take a leaf from the blacksmith's book from the NPC Village and add a border; that little extra effort greatly helps make this simple structure look more attractive.

Always try to use different block types for a roof border. Use slabs, as in the illustration, or backwards steps, forming a gutter, or add a border of blank signs all the way round the building, or a parapet, thus making the roof area safe to use. The only thing you shouldn't do is to just use the same materials as for the rest of the building.

Balcony

File:Balcony.png

A partly covered balcony.

Flat roofs have a greater tendency than other roof types to leak, which means access to the flat roof may be necessary anyway. Hence it's not uncommon for flat roof sections to be paved in some way so that they are useful as outdoor living areas of some kind. Balconies may be large or small, covered or open, or a mixture of the two. Buildings may have multiple balconies on multiple levels.

Shed roof

Shed roof

A shed roof.

A shed or sloped roof is sloped in one direction only. This design is not commonly used for inhabited buildings, and is more likely to be seen on cheap, simple or utilitarian buildings such as sheds, animal houses, outhouses or storage barns.

Gable roof

Gable roof

Simple gable roof design, not suitable for buildings with widths greater than about 12 blocks.

A gable roof, also known as a pitched or peaked roof, is an inverted 'V'. This roof design is common in NPC villages and is useful for small buildings. The building in the image is 6×10 metres. Allowing for the very thick walls one gets in Minecraft that give a usable internal space of 4×8 metres; sufficient for one or two rooms. A building of this size integrates well with NPC village buildings.

Saltbox roof

Saltbox roof

A saltbox roof.

A saltbox roof is a type of gable roof where one slope is much longer than the other. It's common for buildings with this roof type to have two storeys at the front and one at the back; adding a lean-to back roof to an existing structure is a simple way to extend a building. In this picture, the front and back slopes have the same pitch, but this is not always the case.

Hipped roof

Hipped roof

A building with a simple hipped roof.

Pyramidal roof

A pyramidal roof.

A hipped roof (or hip roof) is sloped in both directions. There is far less roof volume (for an attic) available under a hipped roof. Placed on a square building, a hipped roof produces a distinctive pyramid-shaped roof.

Half-hipped roof

Half-hipped roof

A half-hipped roof.

Another way to merge roof styles is to use a gable roof for part of the height of a roof, and then switch to hipped for the remainder. This produces two variant roof types, the half-hipped roof and the Dutch gable or gablet roof, depending on which part uses which style.

For a half-hipped roof, you can 'switch style' at any point, producing a mostly gable roof with a very small hipped area, or mostly hipped. This half-hipped roof image shows 3 rows of gable roof and 2½ rows of hipped roof above it (including the layer of slabs at the roof peak).

Note how these buildings are significantly larger than the NPC village buildings, and yet if they were much smaller their variant roof styles would be difficult to recognise.

Dutch gable

Dutch gable roof

A Dutch gable or 'gablet' roof.

The Dutch gable is a hipped roof with a (usually) small gable at the top. It's very common to put a small window in the gable part, but in this image we have used wooden planks for clarity.

Note that 'Dutch gable' is the common US term for this roof type, but this may sometimes cause confusion with the Flemish gable design described in the roof decorations tutorial.

Skillion roof

Skillion roof

Skillion roof covering a porch.

A skillion roof is a roof surface which slopes in a single direction. It may continue the slope of an existing roof, or be separate. A skillion roof may sometimes be called a shed roof or lean-to. This image of a skillion roof shows a 1 in 1 pitch on the right hand side and a 2 in 1 pitch on the left hand side, allowing the roof to extend out over the porch without dropping to ground level.

Gambrel roof

Gambrel roof

A Gambrel roof. The dark wood shows the profile of a 45° roof for comparison.

A gambrel, or kerb or curb roof has two or three distinct roof pitches – steep lower down, and shallow or flat higher up. The result is that the usable volume under the roof is greatly increased. Some gambrel roofs even have curved sections.

Mansard roof

Mansard roof

A Mansard roof with three distinct roof pitches.

A Mansard roof is similar to a gambrel roof. It has two or possibly three distinct roof pitches – steep lower down, and shallow higher up, and like a hipped roof it has slopes in both the North-South and East-West directions. Hence the usable volume under the roof is greatly increased. Very large buildings may even have several storeys under a Mansard roof. In Minecraft, buildings need to be quite large before a Mansard roof begins to look appropriate, especially as it's very common to have an extended parapet around the roof. The building shown is about 16×20 metres. With a parapet and just a 1m walkway all the way around, that would become 20×24m.

Bell-cast roof

Bell-cast roof

A bell-cast roof.

Like a gambrel roof, a bell-cast roof has two distinct roof pitches, but it is shallow lower down, and steep higher up. It may also be referred to as a bonnet roof.

Saw-tooth roof

Saw-tooth roof

A saw-tooth roof.

A saw-tooth roof has a series of ridges with dual pitches on either side. The steeper surfaces are glazed and face away from the equator to shield workers and machinery from direct sunlight. This type of roof is commonly used for deep plan buildings and factories. It may also be referred to as a northlight roof. Note that to be a 'proper' saw-tooth roof in Minecraft, the windows should all face North or all face South, and you should be consistent about which direction you choose.

Helm roof

Helm roof

A helm roof.

A helm roof or Rhenish helm is a square roof with four gable ends. It is commonly used on towers. The building in this picture is 7×7 metres. To avoid gaps in the roof, slabs are usually needed under the main roof blocks. Here we use upper slabs made of quartz and lower slabs made of red brick. This design tends to work better with square towers of an odd width. Note also that the stair blocks should be placed to face in only two directions – North-South or East-West. Producing a good-looking helm roof with stair blocks facing in all four directions is very fiddly. For symmetry in both directions, it is usually simpler to just use ordinary blocks.

Butterfly roof

Butterfly roof

A 'butterfly' or 'London' roof.

A 'butterfly' or 'London' roof (neither appears to be an established term) is a V-shaped roof which was used in Georgian and early Victorian terraced houses. It is quite a common design in central London. Note that this roof shape is usually placed at the back of the property. The central gutter apparently tends to be prone to leaks. In this image the main roof has been made of red brick, and the borders with adjacent properties have been marked with dark wood.

Advertisement